No items found.

Service Deck Bed

Gooseneck Rating

30,000 LB

Rated Bumper

18,500 LB

This bed is designed for maximum storage and functionality, featuring two vertical cabinets, two angled pull-out trays, two flush-mount top lids, and two rear underbody boxes—plus a bonus locking rear shovel compartment for added storage.

With multiple configuration options, you can customize this bed to fit your industry’s needs. All doors are equipped with a three-point latch system and compression whale tail latches, along with a tamper-resistant, serviceable integrated bolt-on door system for enhanced security.

For towing, the 2.5" receiver supports a bumper pull hitch, while a B&W turnover ball gooseneck hitch comes standard for handling heavy loads. Our receivers are lab-tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity.

Additional features include adjustable galvanized tool trays with optional cabinet tool drawers for organized storage of tools and parts. The bed also comes standard with dual LED rear work lights producing 3,600 lumens, a tailgate, and a gloss black powder-coated finish for durability. Built with smooth 12-gauge sides and an 11-gauge bumper, this bed is the perfect fit for any single or dual-wheel work truck.

‍

REQUEST A QUOTE

add review

Standard Features

NEW* FLUSH MOUNT TOP LID

NEW* WHALE TAIL COMPRESSION LATCHES

NEW* 3 POINT LATCH ON FRONT TOOLBOX

NEW* FLUSH MOUNT REAR WORK LIGHTS, 3600 LUMENS

NEW* BOLT ON HINGES

NEW* SMOKED LIGHTS THROUGHOUT

NEW* CARGO LIGHTS ON THE DECK/INNER CABINET

NEW* SENSOR KNOCKOUTS

NEW* SPARE TIRE KNOCKOUT

NEW* STANDARDIZED B&W TURN OVER BALL GN HITCH

NEW* ANGLE BOX PULL OUT TRAY

NEW* NOTCHED HEAD RACK

NEW* FUEL FILLER DOOR

Steel Structural Frame

2.5" 18.5k Rated Bumper Receiver

30k Rated 2 5/16" Gooseneck Ball

4" Runner Channels (Adjustable on 56" CTA Only)

Formed 3 x 3/16" Channel Cross Members

Steel Tube Head Rack w/ Cross Bars

Steel 1/8" Diamond Plate Floor

Fold-Down Tail Gate w/ Latch

Built in Gooseneck Well With Ball Mounted & Diam Plate Lid

Angled Fuel Filler Neck & DEF Ready

Skirted Rear Bumper w/ Anti Slip Step

Receiver Hitch Ready

4 Tool Boxes w/ Locking Chrome Paddle Latches (6 on 11'4")

Rear Lockable Compartment 27" x 38" - 78"

12Ga Steel Construction w/ 11Ga Bumper

Mud Flap Brackets

7 Way Plug in Gooseneck Box

LED Head Rack Work Light

Adjustable Black Smooth Fender Flares

Primer & Powder Coated Black

3/4" LED Marker Lights

4 Clear 6" Oval LED Reverse Lights

6 Red 6" Oval LED ST/TL/TN Lights

Single LED License Plate Light

Side & Rear Reflectors

Dual LED Work Lights

Single LED Rear Head Rack Work Light w/ Switch

All Lighting DOT Approved

Molded Sealed Harness w/ Resistors

7 Way Receiver Female Plug w/ ADAPTER

7 Way Plug in Gooseneck Well

Adjustable Galvanized Shelves in Front Tool Boxes

‍

options

Extend Head Rack From Standard Height

C-Tech 6 Drawer Package (not available on 84'' long)

B & W Turnover Ball 2-5/16"

Package 02 Includes: (2 Items Listed Below)

Aluminum Diamond Plate Skirt Cover

Stainless Steel Fenders

Package 07 Includes: (6 Items Listed Below)

Chrome Accent Light Package

Chrome Light Housing (not available in SRW)

Chrome License Plate Housing

Aluminum Diamond Plate Skirt Cover

Aluminum Diamond Plate Top Toolbox Cover

Stainless Steel Fenders

‍

bed size guide

Use this guide when ordering your Norstar truck bed. Please observe the measurements of each dimension and check before placing your order.

Length: Measurement from cab to end of frame.
Width: Measurement from outside of tire to outside of tire
CTA: Measurement from cab to axle
Runner: Measurement from outside of frame to outside of frame at the rear of the frame.
Models: ST, SF, SR, SD
Order Method: Model x Length x Width x CTA x Runner
Example: ST 9’4”L x 97”W x 60”CTA x 34” Runners (Add options) Note: 11’ long beds will have 84” CTA

‍

1998-Present

Dually – 8’6”L x 97”W x 56” CTA x 38” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 38” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 40”CTA x 38” Runner
Cab & Chassis – 9’4”L x 92”W x 60”CTA x 34” Runners
F-450 & 550 are 94” & 97”W with Standard Headache Rack
2015 F650 Runners 34.5”

‍

2001-Present

Dually – 8’6”L x 97”W x 56”CTA x 42” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 42” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 42”CTA x 42” Runner
Cab & Chassis – 9’ 4”L x 94”/97''W x 60”CTA x 34” Runners
(Prior to 2000 measurements will be required)

‍

2003-Present

2007 Cab and Chassis – 9’4”L x 94”W x 60”CTA x 34” Runner
Mega Cab – 84”L x 97”W x 40” CTA x 42” Runners
Mega Cab – 84”L x 84”W x 38” CTA x 42” Runners
Dually – 8’6”L x 97”W x 58”CTA x 42” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 58”CTA x 42” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 38”CTA x 42” Runner
2002 and earlier will have 56” CTA and 38” Runners on long bed

‍

Plug N Play

Installation Adapters

The standard wire harness plug on Norstar beds will fit most GM vehicle factory harnesses. We also offer a variety of plug n play adapters that will vehicles year models by the following manufacturers:

1001010 WIRE HARNESS ADAPTER DODGE, CAB CHASS (YEAR 2000-CURRENT)
1001009 WIRE HARNESS ADAPTER FORD, CAB CHASS (YEAR 2000-CURRENT)
1001011 WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE CURRENT (YEAR 2011-CURRENT)
1001013 WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE w/ STOP ADAPTOR (YEAR 2011-CURRENT)
1001012 WIRE HARNESS ADAPTER GM, ADAPTER (YEAR 2015)
1001014 WIRE HARNESS ADAPTER GM, PICK-UP BOX DELETE (YEAR 2010-2014)

‍